593 Sight canting system
Patented design gives identical cant to front and rear sight
Comprises base for the rearsight and a new foresight
Rear base swings radially round receiver / bore-line and the foresight round the bore-line
Elimintaes parallax problems associated with cant at the rearsight only
593A Anschutz
593 Feinwerkbau
As long as stock lasts
700-III MEC Contact-III alloy butt
A lightweight but universally adjustable alloy butt plate assembly
Retro-fittable to nearly all current production and older match air rifles
Can be raised, lowered and contoured to the shooter's shoulder profile
Laterally adjustable on the central block
For right- or left-hand shooter or to step the rifle nearer to or further away from the face
Laser engraved indications
Made from top quality alloy
Silver
704 MEC barrel extension tube
Lightweight alloy tube and two stainless steel movable weights
Foresight movable over longer radius
Matching height rearsight base
Reduces noise at the muzzle
704A Anschütz
704 Feinwerkbau
704W Walther
707 Handstop
Inexpensive 1" diameter alloy handstop with tactile rubber ring and milled edge
Includes a button release steel swivel
Clamps to the fore-end rail by screwing upward without need of tools
708 Bi-pod rifle rest
Inexpensive and easy to use
Keeps rifle upright
Strong steel with large feet
Fits all standard rails
Clamp screw also fits early Parker-Hale threaded rails
708-STOP Gehmann Uni bi-pod handstop
Handstop with steel swivel that can be attached to 708-UNI
Snap-in sling swivel
708-UNI Gehmann Uni bi-pod
Snap-up retractable legs with ball feet
Nylon liner on the rail clamp protects your rail against marks
Strong steel and alloy construction
709-II MEC butt hook unit
Wing elements allow it to be placed up high, at an angle and rotate around the axle
Improved shape with grooving
Steel wing holders
Improved centre block
Fits all current KK sport rifle
719 MEC trigger
Precision machined alloy
Rubber strips for greater finger sensitivity
Adjustable in any axis
Easily locked in position
719TA Anschütz
719TF Feinwerkbau
719TS Steyr
719TW Walther
801 Butt assembly
Fully adjustable butt assembly
'Top-Grip' rubber surface
Strong alloy / steel combination
Laser engraved settings
807 High sight base for rearsight unit
Necessary height adjustment for when changing your foresight tunnel from M.18 to bigger M.22, in order to bridge the height gap and to make full use of the rearsight’s adjustment track
For use with all current mounting rails
4mm height adjustment
809 Gehmann butt hook unit
Fully adjustable butt / hook assembly
'Top-Grip' rubber surface
Supplied with hook extensions
Strong alloy / steel combination
Laser engraved settings
832 Stabilizer / Barrel weight
Stabilizer / barrel weight for standard barrels diameter 21.5 - 22.5mm
Entirely made from steel and blued
Two-piece easy fit system
With a protective felt inlay to prevent barrel scratches
Weighs only 200grms
Made in Germany
835 Gehmann alloy butt pad
Vertically adjustable
Unbelievably priced alloy butt plate assembly
Laser engraved indications
839/A/W Gehmann Multi-height sight base set with quick adjustment
Individually adjustable aluminium multi-height sight base set
Vertical adjustment from 26.5mm to a maximum of 47.5mm in 1mm increments, starting with 6mm of quick adjustment
Supplied with:
4 x sets of packing discs (4 x 1mm, 4 x 2mm, 4 x 4mm, 4 x 8mm)
4 x sets of matching length screws
Additional lateral shift of 5 or 10mm
Height quick adjustment without the need of tools
Vertical and horizontal scale to control the settings
Stable steel clamps with spring return mechanism for a firm fit
Compact design
839 Feinwerkbau
839A Anschütz
839W Walther
840 Gehmann alloy handstop
Multi-adjustable in all directions
Pivots for vertical angle, left and right positions and to your preferred distance from the fore-end rail
Removable spacer provides two different widths for the thickness of your hand
Press-button detachable swivel which is stepped out from the body for greater comfort
Fits all standard rails
Only weighs 135grms
Silver finish with special non-slip surface
Strong alloy/steel combination
Supplied with 985 alloy carry case
840-III Gehmann Contact-III alloy butt
A lightweight but universally adjustable alloy butt plate assembly
Retro-fittable to nearly all current production and older match air rifles
Can be raised, lowered and contoured to the shooter's shoulder profile
Laterally adjustable on the central block
For right- or left-hand shooter or to step the rifle nearer to or further from the face
Laser engraved indications
Made from top quality alloy
Silver and black finish
841A Gehmann barrel extension tube
Blue anodised alloy with two movable weights
Matching sight raiser base for rearsight
Foresight positionable over a longer radius
Reduces muzzle noise
For Anschütz air rifles only
length: 15cm
843S Gehmann alloy butt, silver-black
Inexpensive silver & black alloy butt plate, now with a wider range of movement
Butt plate base allows height and radius adjustments and has top and bottom legs which may be positioned for angle and length over the shoulder depth
Suitable for all rifles with standard attachment bolts and suitable for left- or right-hand shooter
Laser engraved indications
844 Gehmann multi-height sight base sets
For use on all standard rails
Offers several height capabilities (from 13mm up to 28mm) - in combination with packing discs supplied (4 x 1mm, 4 x 2mm, 4 x 4mm, 4 x 8mm)
Includes matching length allen screws to suit your chosen height
Lateral shift across of 5mm
Laser engraved indications
Spring-loaded, stable clamps
Finished in an attractive alloy and black combination
844A Anschütz
844F Feinwerkbau
844W Walther
844-S Screw set 'Final'
Ideal for use with 844
Enables quick and easy sight change when time is of the essence
845 Gehmann alloy handstop
The first and only infinitely width adjustable handstop
Unique split-centre clamp makes it possible to profile the handstop precisely to your hand
Finished in an attractive red anodising
Ball-fitting detachable sling swivel (steel)
845R (845) red
845S as 845 but silver
845B as 845 but blue
846 MEC handstop
Alloy construction with tactile rubber rings for added grip
Detachable press-button swivel stepped away from the handstop for comfort
Clamps onto the rail in the same manner as the 707
847 Gehmann alloy high sight base sets
fits Feinwerkbau
Vertical lift is 7.5mm
Clear laser engraved indications
Spring-loaded clamps for positive grip
Anodised in a choice of colours:
847 Red
847S Silver
847B Blue
847SW Black
848 Gehmann adjustable high sight base sets
Infinite vertical lift from 6 to 15mm as 848 but also offering up to 6mm lateral adjustment
Easy locking in position
Finished in matt black alloy
Clear laser engraved indications
848A Anschütz
848F Feinwerkbau
848W Walther
849 Gehmann multi-directional high sight base sets
Infinite vertical lift from 6 to 15mm as 848 but also offering up to 6mm lateral adjustment
Easy locking in position
Matt black alloy, precision engineered to fit
849A Anschütz
849F Feinwerkbau
849W Walther
859-N Gehmann height & mount adjustable extension rail
Contemporary sight line elevation and rail extension
Fits 11 to 13mm rails
Extremely strong rail clamps - spring-loaded
11mm top dovetail guide for scope mounts
Bottom clamps are variably adjustable along the rail
Height: 19mm
The rail can be put on an incline for simple and fast adjustment of a scope from 50 to 100m
Adjustments can be easily made even with a scope attached
Weighs only 100grms
Made in Germany from high quality aluminium
G+E144463 / G+E144464 Touch trigger blade
Assembly, curved (Art. No.: G+E144463)
Assembly, straight (Art. No.: G+E144464)
G+E148000 / G+E148001 Buttplate EASY
Vertical adjustment via a curved mounting plate
Easily mounted on all types of sport rifles
Highly precise and modular mechanics deliver fine calibration
Versions with
EA 1: SuperGrip with nubs (Art. No.: G+E148000)
EA 5: SuperGrip with 5mm rubber pieces (Art. No.: G+E148001)
G+E148060 / G+E148061 Buttplate EVOLUTION
Vertical adjustment via either a straight mounting plate (2 axes) or a curved mounting plate (3 axes)
Easily mounted on all types of sport rifles
Versions with
EV B1: SuperGrip with nubs (Art. No.: G+E148060)
EV B5: SuperGrip with 5mm rubber pieces (Art. No.: G+E148061)
G+E148100 / G+E148101 Buttplate XTREME
Vertical and axial adjustment via cogwheel
The top section of the buttplate rocks in two dimensions and can be adjusted +/-12°
Easily mounted on all types of sport rifles
Highly precise and modular mechanics deliver fine calibration
Versions with
XT 1: SuperGrip with nubs (Art. No.: G+E148100)
XT 5: SuperGrip with 5mm rubber pieces (Art. No.: G+E148101)
XT F5: With hook and SuperGrip with 5mm rubber pieces (Art. No.: G+E148111)
XT F10: With hook and SuperGrip with 10mm rubber pieces (Art. No.: G+E148112)
G+E148117 Buttplate RETURN
Vertical and axial adjustable by a cogwheel
The pitch of the shoulder plate can be adjusted
Easily mounted on all types of sport rifles
With quick adjustment
Version:
R FN: SuperGrip with nub surface (Art. No.: G+E148117)
G+E148200 / G+E148202 / G+E148204 / G+E148206 SPYDER Handstop DIABOLO
Easily and safely mounted on your rifle with no special tools
Easy to use almost all types of slings
Available as follows
Art. No.
Material
Size
G+E148200
aluminium
normal
G+E148202
plastic
normal
G+E148204
aluminium
small
G+E148206
plastic
small
G+E148210 SPYDER Handstop ZYLINDER
Easily and safely mounted on your rifle with no special tools
Easy to use almost all types of slings
Plastic
G+E148214 SPYDER Handstop MASTER
Easily and safely mounted on your rifle with no special tools
Easy to use almost all types of slings
Aluminium
RH only
G+E148310 / G+E148300 Handstop SPOOL with ball sling swivel
Handstop with ball sling swivel
Available in "big" (Art. No.: G+E148310) and "small" (Art. No.: G+E148300)
Single ball sling swivel (Art. No.: G+E160851)
G+E148311 / G+E148301 Handstop SPOOL with button sling swivel
Handstop with button sling swivel
Available in "big" (Art. No.: G+E148311) and "small" (Art. No.: G+E148301)
Single button sling swivel (Art. No.: G+E160861)
G+E149200 Balance barrel weight
Influencing the centre of gravity through the barrel weight
Attaching without tooly by a quick-release fastener
Free positionable without tools
Weight with 4 weight bolts 115g
Weight without weight bolts 75g
G+E149300 / G+E149301 / G+E149302 Line raiser 8.5mm
Spring-return slot nut
Dovetail rail full length
Universal, fits all 11mm prism
Line raiser 8,5mm:
Sight line raiser (Art. No.: G+E149300)
Rearsight raiser (Art. No.: G+E149301)
Front sight tunnel raiser (Art. No.: G+E149302)
Also available with Speedlock quick-adjustment version
Line raiser with Speedlock 8.5mm:
Sight line raiser (Art. No.: G+E1493001)
Rearsight raiser (Art. No.: G+E1493011)
Front sight tunnel raiser (Art. No.: G+E1493021)
G+E149310 / G+E149311 / G+E149312 Line raiser 10mm, horizontal 15mm
Horizontal, 1mm click increments
Scale
Height up to 28mm
Spring-return slot nut
Universal, fits all 11mm prism
Line raiser 10mm, horizontal adjustment 15mm:
Sight Line raiser (Art. No.: G+E149310)
Rearsight raiser (Art. No.: G+E149311)
Front sight tunnel raiser (Art. No.: G+E149312)
Also available with Speedlock quick-adjustment:
Line raiser 10mm, horizontal adjustment 15mm with Speedlock:
Sight Line raiser (Art. No.: G+E1493101)
Rearsight raiser (Art. No.: G+E1493111)
Front sight tunnel raiser (Art. No.: G+E1493121)
G+E149320 / G+E149321 / G+E149322 Line raiser 10-28mm, horizontal 15mm
Horizontal, 1mm click increments
Horizontal adjustability 15mm
Scale
Height adjustable from 10 - 28mm
Spring-return slot nut
Universal, fits all 11mm prism
Line raiser for:
Sight Line raiser (Art. No.: G+E149320)
Rearsight raiser (Art. No.: G+E149321)
Front sight tunnel raiser (Art. No.: G+E149322)
Also available with Speedlock quick-adjustment:
Line raiser with Speedlock for:
Sight Line raiser (Art. No.: G+E1493201)
Rearsight raiser (Art. No.: G+E1493211)
Front sight tunnel raiser (Art. No.: G+E1493221)
G+E149334 Upgrade kit for Sight line raiser 10mm
Height adjustable 10-28mm
Self-centering components
G+E149399 Quick-release bipod with adjustable legs
Quick-release bipod with folding legs for easy and fast assembly without tools
Adjustable legs with spring system
G+E149400 Quick-release bipod
Quick-release bipod with solid legs for easy and fast assembly without tools
G+E149500 / G+E149501 / G+E149502 / Front sight tunnel base M18
5° click increments
Spring-return slot nut
M3 thread for mirage band attachment
For:
G+E (Art. Nr.: G+E149500)
FWB (Art. Nr.: G+E149501)
Walther (Art. Nr.: G+E149502)