A1420 Anschütz 8001 CLUB
The model 8001 Compressed Air CLUB (incl. sight set 6834): The models 9003 Premium and 8002 are very successful on the air rifle market. Many national and international top results could be reached with ANSCHÜTZ air rifles. The model 8001 CLUB Walnut replaces the current models 8001 and 8002 Club. The 8002 barrel housing with trigger and complete cocking piston unit was incorporated into the new model 8001 CLUB. This model is interesting for beginners who are looking for a high-quality but low cost air rifle version.  The 8001 CLUB Walnut is equipped with a non-stained walnut stock with vertically adjustable cheek piece. The cheek piece is adjusted via unthreaded steel columns. The butt plate has the same adjustment. The rifle is delivered with rubber butt plate 4709A. The cocking lever is positioned at the right side but can also be attached to the left.  In order to allow an individual adaptation to the trigger the black trigger blade of trigger 5065 B is variably adjustable.  The rifle is delivered with a long aluminum compressed air cylinder in silver (shooting capacity approx. 300 shots) and including the sight set 6834. An accessory box is also part of the delivery. As this beginner model is based on a modular principle it is possible for the advanced shooter to attach most of the other components of the ANSCHÜTZ accessory range apart from the stabilizer. 
A1424 Anschütz 8001 JUNIOR
The model 8001 Compressed Air is derived from the renowned barreled action of the compressed air rifle 8002. This model is especially interesting for beginners and clubs who are looking for a high quality, attractive but low-cost air rifle version. The cocking lever is at the right side. It is possible, however, to attach it to the left as well.  The light aluminum barrel jacket is as long as the one of the model 8002, the JUNIOR model, however, is equipped with a shorter JUNIOR compressed air cylinder. As this beginner model is based on a modular principle it is possible for the advanced shooter to attach all of the other ANSCHÜTZ accessory components.  The 8001 Compressed Air JUNIOR COLOR is equipped with a colored right/left stock. The cheek piece is variably adjustable in height via steel columns without thread, the backend is equipped with the butt plate carrier with tiltable column guide and the aluminium butt plate 4759.  Delivered with: Sight set 6834, Accessory box with filling adapter, air release screw, special grease 4425, Allan key, safety discs, o-rings, barrel weight, manual with original test target. air rifle version. The cocking lever is at the right side. It is possible, however, to attach it to the left as well. 
A1455 Anschütz 8002 S2 Compressed Air ALU
Air rifle model 8002 S2 Compressed Air Good is not good enough. ANSCHÜTZ has developed a successor for the target air rifle series model 2002 which has been very successful for many years. With the new Target Compressed Air Rifle Model 8002 S2 the shooters profit from the knowledge ANSCHÜTZ acquired in the course of the latest revolution in the field of air rifle technology. A target compressed air rifle that meets all state-of-the-art requirements of a competitive air rifle. NEW: now with maintenance-free stabilizer! Barreled action Recoil and vibration-free ANSCHÜTZ compressed air barreled action with vibration absorbing elastomers. The very fast lock time of the ANSCHÜTZ 2002 Compressed Air has been outstanding all times. Now the lock time was shortened even more by using new materials and technologies, for example for the new firing pin. The mechanic trigger unit is a completely new development, too, and offers a constantly reliable trigger behaviour even at extreme temperatures due to the use of uniform materials. The barreled action is only cocked when the action is closed completely. If the cocking lever is not closed completely, it jumps back automatically and a shot release is not possible. Safety is also an important feature of the dry firing device. The dry firing mode can only be actuated in cocked condition. It is therefore not possible to uncock the barreled action by pushing the dry firing switch once the trigger has been released. Thus an inadvertent shot release is avoided. Air filter against pollution. To guarantee a trouble-free function of the compressed air technology an air filter was developed to protect the pressure regulator and the valve against impurities which in turn avoids malfunctions.The refill adapter was also equipped with an air filter. The aluminum compressed air cylinder (max. 200 bar filling pressure) is equipped with a manometer and can easily be exchanged without tools. Its capacity lasts for approx. 300 shots at a filling pressure of 200 bar.The maintenance friendly valve unit provides for a precise shot release and an extremely short lock time at an utmost consistency of pressure from shot to shot.  Stock Anatomically perfect aluminum stock with unique and versatile ANSCHÜTZ aluminum butt plate and cheek piece adjustment. The balance of the rifle can be adjusted to the individual requirements of the shooter with the help of a v riety of weights, weight rings and barrel weights. The aluminum stock is available in right or left hand version. The grip, the cheek piece and the fore-end are of PRO-Grip material which has an antiskid, rough surface. The shooter can smoothen the grip with a fine, abrasive paper and thus adapt it to his wishes.  Delivered with  Sight set 6834, Accessory box with filling adapter, air release screw, sight raiser block, special grease 4425, allen key (5 pieces), safety discs, o-rings, barrel weight and moveable weights (2 pieces under the fore-end raiser block, only for PRO-Grip equipment), manual with original test target.