300 & 300P Gehmann frames
300 with 23mm lens holder (image 1)
300P with 37mm lens holder (image 2)
Finished in attractive matt silver
Adjustable side-bars
Setting the width of your face to our frames is done by locating the sidebar in one of three holes at the end of the crossbar
Comfortable, soft sprung earpieces
Sliding mount sets holder position on the crossbar plus up or down angle
23mm (300) or 37mm (300P) lens holders can be easily rotated in the top mount
The nose-bridge is adjustable for height
Silicone nose piece is width adjustable
300P with optional components (image 3)
Supplied in free carry case 985 (image 4)
301S-N / 301T-N / 301W-N I.S.S.F. flip-up eyeshields with 305 clamp
30mm width so compliant with I.S.S.F. rules
301S-N black
301T-N translucent white
301W-N white
313 Universal mount for Gehmann frames
Enables lens holder to be manoeuvred to a greater number of different positions
340 & 340-K Clip-on irises for shooting frames
Clip directly on to lens holder
340: 37mm fitting
340-K: 23mm fitting
344 & 344-K Centering devices
Push on to your lens holder to assist alignment
344: 37mm fitting
344-K: 23mm fitting
390 Gehmann clip-on iris for ordinary glasses
Improves depth of field vision for a clearer rearsight and foresight picture but allowing use of your own glasses for distance
The iris is sprung-mounted on its plate to allow accurate positioning of the iris for quick and perfect alignment
Iris leaves with our latest surface coating to eliminate oxidation and to preserve the matt black anti-glare finish
Clips to your glasses with a spring loaded rubber clamp
Can be easily flipped up (and stays up) for normal vision
391S Clip-on eyeshields black
Designed to match 390
For use by right or left handed shooter
Clips to your glasses with a spring loaded rubber clamp
Can be easily flipped up out the way for normal vision
black
also available: 391 translucent white
392 3-colour filter set for 390
A set of push-in colour filters for clip-on iris 390 above
Improves sight picture and enhances black and white target contrast
Colours: Yellow, orange and grey
393 Gehmann stick-on iris for ordinary glasses
A mini stick-on iris for use on ordinary glasses
Improves depth of field
Exceptionally lightweight
Iris can be radiused round the sticker and rotated around its support post
Iris adjusted with a simple twist of its body
Exceptional quality at an attractive price
501 Lens holder for later Gehmann irises
23mm lens holder allows a prescription lens to be fitted eye-side of your rearsight manufactured exclusively for our own latest irises with a detachable front thread and not carrying our 1.5x magnified diopter
The detachable steel front thread of your iris is removed with the factory spanner
501's adaptor thread is then screwed into the front of your Gehmann iris
501, now with your iris mounted, is screwed into your rearsight after loosening the rail carrier's allen screw
Mount your prescription lens in the lens holder which may be slid off the rail for easier assembly
Reposition the lens holder on the rail as required and lock it in place
Positioning of the assembly on your rearsight is easily set as the attachment boss has radial adjustment and is simply secured with the allen screw located in the front body
501-A Lens holder for all irises
23mm lens holder allows a prescription lens to be fitted eye-side of your rearsight
For all other manufacturers irises and our own earlier versions that didn't have the ability to remove the front attachment thread
Mount your prescription lens in the lens holder which may be slid off the rail for easier assembly
Reposition the lens holder on the rail as required and lock it in place
Positioning of the assembly on your rearsight is easily set as the attachment boss has radial adjustment and is simply secured with the allen screw located in the front body